We use cookies. For more information go to privacy policity
Close
+7 (342) 241-03-69
+7 (342) 241-04-69
RU EN

SE/ME-VSX

TubeTrace SE/ME VSX

TubeTrace SE ME VSXTubeTrace, with “cut-to-length” VSX self-regulating heat tracing, is designed to provide freeze protection or temperature maintenance from 40°F (5°C) to 300°F (149°C) for tubing where high temperature exposure capability is possible. VSX withstands intermittent temperature exposures of 450°F (232°C).

Self-regulating VSX heat tracing

  • Varies in response to the surrounding conditions along the entire length of a circuit.
  • Lower risk of overheating the tube or product.
  • Installed cost is lower because “cut-to-length” VSX makes end connections easy with minimal waste.
  • VSX is approved for use in ordinary (non-classified) areas and hazardous (classified) areas.

Construction

Конструкция TubeTrace SE/ME VSX

1. Process tube(s)

2. VSX self-regulating electrical heat tracing

3. Heat reflective tape

4. Non-hygroscopic glass fiber insulation

5. Polymer outer jacket (ATP or TPU available)

Product features

  • Self-regulating
  • “Cut-to-length”
  • Hazardous area approvals

Ratings/Specifications

VSX Ratings
Available watt densities 5, 10, 15, 20 w/ft @ 50°F
16, 33, 49, 66 w/m @ 10°C
Supply voltages 110-120 or 208-277 Vac
Tube temperature range 40°F to 300°F (5°C to 149°C)
Maximum exposure temperature
Intermittent power-on
Intermittent power-off
Continuous power-off
450°F (232°C)
482°F (250°C)
400°F (204°C)
T-rating T3 392°F (200°C)

Power Output Curves

The power outputs shown apply to VSX heat tracing installed on insulated metallic pipe (using the procedures outlined in IEEE Standard 515-2004). Power output may be slightly higher due to the thermal efficiency of TubeTrace.


  Contact us energy@teplina.ru or use feedback form.
Ask a Question / make an order
* — required fields
Confirm that you are not a robot
* — required fields